RUNGTA Rigid PVC pipes conforms to IS-4985 specifications with latest amendments, manufactured in high-tech plant with latest manufacturing technology under strict quality control.
RUNGTA Rigid PVC pipes are best preferred for disposal of chemical effluent & waste, acid slurries transportation, irrigation in agricultural farms. water supply, telecommunication cable ducting etc.
RUNGTA Rigid PVC pipes have been preferred over other available resources due to varied salient features
-
- Tuff and durable
- Low weight
- Easily jointing
- Good flow characteristic
- Power saving
- Safe
- Leak proof
Resistant to moisture, corrosion, chemical, abrasion & wearingLong lasting & maintenance free
Applications
Industrialized:
- Disposal of chemical effluent & waste.
- Acid & slurries transportation.
- Salt water handling.
Farming:
- Irrigation schemes for agricultural purpose.
Salient Features of Elastomeric Pipes
Tough and Durable: RUNGTA Rigid P.V.C. Pipes & Fittings are strong, impact resistant & unaffected by weather conditions
Light load: Are easy to handle, transport & install even on difficult terrain.
Power Saving: Have smooth internal surface which implies low frictional loss. Hence power consumption is on lower side.
Are completely free from leaks
Reveal Proof: Have smoother bore in comparison to AC and GI pipes which ensures a better flow.
Secure: Are self extinguishing with good thermal & electric insulation.
Opposing to:
- Wetness.
- Rust.
- Chemicals.
- scrape.
- exhausting.
Best Flow feature:
There is no deposit formation which implies better flow.
Lifelong & Maintenance Free
Are free from corrode factor, hence last longer and need minimum safeguarding.
| Evaluation & benefits of RUNGTA PVC over Galvanized, AC & Cast Iron | |||||
| Property | RUNGTA PVC Pipe | Galvanized Pipe | AC Pipe | Cast Iron Pipe | Advantages of RUNGTA
Rigid PVC Pipe |
| Heaviness | Light | Heavy | Heavy | Very Heavy | light weight therefore easy in shifting & get-together in jointing |
| Face | Very Smooth | Rough | Light Rough | Rough | Smooth surface gives 25 % more flow therefore smaller diameter pipe can be used. |
| Length | 6 meter | 5 to 6 meter | 3 to 4 meter | 3 to 4 meter | Available in full length so less joints and couplers. Thus they are economical |
| Flow | Initially 50 % more flow in comparison to other & retain flow till end | Initial flow gets reduced slowly because of rust | Initial flow is 40 % more | Initial flow reduced by 40 to 50 % after 5 to 10 years | Full and constant flow from initial stage which is 25 % more than GI Pipe |
| Effect of rust | difficulty of rust does not arise | Get rusted | Do not get rusted | Rapid rust formation | It is rust proof therefore lifelong |
| buildup of particles forming rust | Very less change therefore dia of Pipe remains unaltered permanently | Particles build up heavily thus dia etc abridged on long run | Particles does not mount up | Heavy growth of particles thus dia gets reduced after a period | Since diameter remains same it gives uniform flow permanently |
| Life | Lasts a lifetime | Gets rusted so required to be changed after 30 years | Less chances of changing | Required change after 20 years | Investment once in a lifetime |
| Cost of material | Very less costly | Very costly | Less costly | Very Costly | Very economical compared to other pipes |
Injection Molded Fittings (20 mm – 200 mm)
| Coupler | Elbow |
| Tea | |
| Plain End Cap | |
| Service Saddle | Reducer |
| Threaded Elbow | Tail Piece |
| Threaded End Cap | Threaded Tee |